How do I set up an Epson printer?

With an Epson label printer from the TM-i series you print labels directly from apomap. Setup takes about 10 minutes.

1. Add the printer in apomap

Under Settings → Printers, click Create printer. Enter a name, for example "Back office printer", and choose the location and printer type Epson.

2. Copy the SDP link

In the list you see the SDP link for the new printer. Copy it – you'll need it in a moment.

3. Find the printer's IP address

Connect the printer to your network. It gets an IP address from your router and prints a label with the network information. The IP address is in the first line, for example 192.168.0.91.

4. Configure the printer

1. On a PC in the same network, open the browser and enter https:// followed by the IP address, for example https://192.168.0.91.
2. Sign in.
3. Open EpsonNet Config for TM-i and then Server Direct Print.
4. Set Server Direct Print to Enable.
5. Under Server 1 → URL, paste the SDP link from apomap.
6. Click Apply & Restart. Wait until the printer prints the network label again.

5. Test print

Open an order and print a label. The first print can take up to 10 seconds. → How can I use the print function?

In the printer list under Settings → Printers you can also see whether the printer is currently online.

Updated on: 04/11/2026